0
Driving a car with two missing lug nuts is not recommended. The lug nuts are crucial for securing the wheel to the hub, and missing them can lead to wheel instability, increased stress on the remaining lug nuts, and potential wheel detachment while driving. This poses a serious safety risk for both the driver and others on the road. It's best to replace the missing lug nuts before driving the vehicle.
What else can I help you with?
Is it safe to drive with missing lug nuts?
It depends how many are actually missing, if it is just one, then I would say it is reasonably safe, but would get it replaced ASAP.
Can I drive a commercial vehicle in the state of Florida with a broken lug nut?
no you can't in any state it can't be missing
How many lug-nuts are on a 2000 Lincoln town car?
On a 2000 Lincoln Town Car : ( there are 5 lug nuts per wheel , total of 20 lug nuts )
Lug nuts on a standard car wheel?
5 lug nuts is common in 3/4" size.
Change Volvo S40 spare tire?
put car in park. loosen lug nuts on flat tire. jack car up just high enough to remove flat tire. remove lug nuts. remove flat tire. replace with new tire. put lug nuts back on and tighten. lower jack. drive away
Changing the tire on a 2005 AUDI A4?
Loosen the lug nuts counterclockwise. Next, jack up car at the jack points (there are covers below the rocker panels). Jack up car, unloosen all the lug nuts. Remove wheel, replace wheel. Tighten lug nuts until they are seated against the rim. Lower car. Tighten lug nuts crosswise. Next stop, have the lug nuts torqued down.
How do you change Kia lug nuts?
KIA lug nuts are the same as other lug nuts on other car makes. To remove or tighten them, use a standard lug nut wrench or the one found in the trunk of your KIA.
How many lug nuts are on a standard car wheel?
5
How many lug nuts are in standard car wheel?
5
How many lug nuts are a standard car wheel?
5
How do you change a tire on 96 cavalier?
loosen the lug nuts with a 19mm wrench. jack up the car. remove the tire. put a new one on. put the lug nuts back on tight enough. lower the car. tighten lug nuts to 90 ft-lbs
Changing wheel assembely on 87 Chevy Celeberty?
To change the a wheel assembly on a car: 1. Loosen the lug nuts. 2. Raise the car as required and put on a stand. 3. Finish taking off the lug nuts. 4. Remove the wheel and put the replacement wheel in place. 5. Put the lug nuts back on, remove the stand and lower the car. 6. Tighten the lug nuts.
