Yes, with an OBD II reader. Disconnecting the battery won't reset it.
unbolt the crossbar above it
Check your battery cables. I had same issue
with a scan tool or by disconnecting the battery.with a scan tool or by disconnecting the battery.
There is nothing to reset. The computer will function normally when you connect the battery again.
With a scan tool, or by disconnecting the battery for 10 minutesWith a scan tool, or by disconnecting the battery for 10 minutes
Pry open the fob using a coin or a small screwdriver.
try disconnecting the battery.
NO
you have to remove the bracket that goes over the top of the battery then its just a matter of unbolting the hold down bracket and the cables
To reset the computer on a 1992 Oldsmobile Cutlass Supreme, unhook the battery for about five minutes. Then reconnect the battery. If this does not work, look for the reset button on the computer and manually reset it.
are you sure your battery isn't dead??? i have a 2000 intrigue and i know when my battery would die it would just make clicking noises and never had enough power to crank the engine over hope this helps
try disconnecting battery for at least five minutes.