Towing an automatic 4x4 S10 with all four wheels down is generally not recommended, as it can cause damage to the transmission and drivetrain. Most manufacturers advise against flat towing vehicles with automatic transmissions unless specifically designed for it. If you need to tow this vehicle, using a tow dolly or a trailer is usually the safer option. Always consult the owner's manual for specific towing guidelines and recommendations.
no GM changed the cases
It should be a 4L60E.
700-R4
700R4
You need to adjust the cable on the brake.
Corvette and Camaro wheels will fit a Blazer, direct bolt on. Some might need spacers in front or/and rear.
Yes
No. You can remove the engine and leave the transmission in the vehicle.
Find help here: http://www.syty.huryde.com/html/trans/Tranny%20Rebuild.pdf
i have a 1989 chevy blazer gos in 4x4 drive but front wheels are not pulling wat do i do about that
2001 4x4 s10 lug pattern
4x4 will jerk when accel. especially while turning. It is alot of torque on all four wheels pulling at the same time. You should only accel slowly with 4x4 on, especially in 4x4 low.