0
Properly support vehicle with wheels off.
Remove rear differential cover and properly dispose of differential oil.
There are "C clips" holding axles into gears in differential housing (1 C clip per axle), remove them.
Remove brakes and anything else that obstructs removal of axle on sides of vehicle where wheels go.
Pull out axles.
Pull out axle seals, be prepared to catch more waste oil, you may need to use a special puller to get them out, but it is possible to do with basic hand tools (they are the things that hold the rubber part that contacts axle).
Install new seals, you may do so by placing seals where they are to be installed then place a peice of wood on them and tap them into place with a hammer (hammer strikes wood).
Get proper type and amount of axle gear oil.
Use your finger to swab some oil on the rubber where the axles will contact.
Install parts in reverse order of removal.
When installing differential cover make sure mating surfaces are clean, install new differential cover gasket (no sealent is required), and do NOT overtighten differential cover bolts!
Add differential fluid to proper level (level of filler hole).
Ensure there are no leaks and you are finished!
What else can I help you with?
How do you change a rear axle seal on a 2003 gmc 2500 hd sierra?
Remove the tire and wheel from your 2003 GMC 2500 Sierra. Remove the end of the axle. Using a seal puller remove the axle seal. Reverse the process to install your new rear axle seal.
How do you change a rear axle seal on a 2004 ford escape?
how t change rar axle seal on 04 ford escape xlt
How do you change rear axle seal 99 Mazda B4000 4x4?
To change the rear axle seal on a 1999 Mazda B4000 4x4, first, safely lift and support the vehicle. Remove the rear wheels and disconnect the brake components. Then, drain the differential fluid and remove the axle housing cover to access the axle shafts. Carefully extract the axle shaft, remove the old seal using a seal puller, and install the new seal before reassembling the axle and refilling with fluid.
How do you replace 2001 Chevy silverado rear main seal?
How do you change a rear main seal on a 2001 Chevy 2500 HD long bed
How do you replace a Ford F-150 rear axle seal?
how do you replace a Ford F150 rear axle seal
How do you change rear axle seal in a 2002 Chevrolet Silverado?
First, remove the axle. Then, user a large screwdriver or a seal remover to remove the seal. Tap a new seal into place with a hammer. Reinstall the axle and fill the differential lubricant.
What can leak on a rear drum brake?
Brake wheel cylinder or axle sealBrake wheel cylinder or axle seal
How do you change axle seal on 2006 Saturn Vue?
Remove the tire and wheel. Remove the axle end cap. Remove the axle seal with a seal puller. Reverse the process to install the new axle seal.
How do you replace a rear axle seal in Nissan Titan truck?
To replace a rear axle seal in a Nissan Titan, first, lift the vehicle and secure it on jack stands. Remove the rear wheel and brake components to access the axle. Then, remove the axle nut and pull the axle out of the housing. Finally, replace the old seal with a new one, ensuring it's seated properly, reassemble the axle, and reinstall the brake and wheel components.
How do you replace right rear axle seal on 1992 Buick roadmaster?
buick roadmaster 1992 rear axle does it have limited slip diff
How do you replace the seal on a rear axle on Ford Aerostar 1996 van?
What type of rear end do you have?
What is the part number for a 1967 Chevelle rear axle seal?
The rear outside axle seal on my 1968 Chevelle has on it's outside face, the number 3832418. I am not sure if GM uses this same number for their parts inventory, but the manufacturer of the seal does.
