answersLogoWhite

0


Best Answer

check fuel pump relay!!

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Chevy cavlier 2001 changed fuel pump and car still want start?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

You changed your fuel pump but your 98 Chevy s-10 still wont start why?

was fuel filter replaced


You changed the plugscaprotorand wires on your 95 Chevy truck now it wont start?

check all wiring and connections for proper hookup. if no start still, reinstall old cap and rotor. If no start still, do diagnostic on electrical system.


Why captiva wont start?

Why my Chevy Captiva won't start? I changed fuel pump, spark plugs and cleaned the fuel injectors, tested the ignition coils all is good but still will not start. please help thanks.


What happens when you have just changed the crank positioning sensor on a 2002 Chevy blazer 6 cylinder and it still will not start?

Was that the only code that caused you to replace it? Do you have it close enough to sense again.


Why 89 Chevy caprice starts only when you spray starting fluid in the carbuertor I changed fuel pump but still won't start?

weak spark or plugged fuel lines Did you change the fuel filter?


1993 Chevy Lumina have changed NUMEROUS sensors but still just cranks over and over and will not start Have changed fuel pump it HAS gas it HAS spark so why?

have you checked to see if the timing belt or chain is broken? have you checked cylinder compression? is the oil up to proper level?


What if the headlight bulb on a 99 Chevy Malibu has been changed and the light still does not work?

Could be a fuse or the wiring in the car


Replaced fuel pump on 1990 Chevy blazer and still will not start?

does that year have carb or tb?


Chevy 95 S10 heater inop blows cool air?

Heater core changed three years ago,I changed Thermostat Heater still blows cool air.


How do you determine the cause of your engine failure in a 97 Chevy Cavalier?

I was driving on the highway and the car just stalled and wouldn't restart. Originally it showed a code for cam position sensor. I changed the cam pos sensor. It still wont start. When I try to start it it cranks much faster than normal. Now it shows a code for a MAP sensor. I changed that...nothing. Any ideas.


2001 Chevy blazer changed plug wires distributor cap and rotor cap?

And you still have a skip? Probably a bad injector.


91 cavalier 3 1wont start changed ignition module and still wont start?

change the crank position sensor