First leave your front and rear windows open during a hurricane, the water will make the plastic swell and stick to door frame. then have one of your buddies jump in for a ride, when he opens the door the outer panel will open and the inner panel will remain stuck in the frame. Next remove the window and lock wires and you've got you're panel no removal of bolts or pins required! trust me Answer Pop the pins or undo the bolts. There are 4 screws in the door one under the handle one on the top right one near the handle and one near the bottom inside corner. use a small screw driver and remove the circle covers and the little plate behind the opner handle. then remove all srews after all screws are removed pull the panels off. Go to this link http://www.wjjeeps.com/doors/doorpanel.htm it has a very nice explanation, pctures and everything.
You don't need to remove front door panels, the speaker grills come out.
GH
how to remove door panel 06 cdallac sts
how to remove the door panels to re and re the speakesrs on a 2001 navigator ? how to remove the door panels to re and re the speakesrs on a 2001 navigator ?
For removing the door side panels, See "Related Questions" below for specifics on the front & side doors.
a fork
1.- remove the doors panels 2.- remove the old factory speakers
the back panels can be removed by gripping the end of the panel from the trunk side and pull outward s gently there are several clips that needs to be disengaged for it to come out. As for the front i have no idea..
Remove the door panels
You can if you remove the rear drive shaft.
On my 2000 grand cherokee, It was in front of the battery on the fender wall. Remove battery and you should find it. It is under the bumper cover, under the passenger head light. You either have to remove the front bumper, or you remove the headlight and cut an access hole.
You need to remove the front and rear seats. Remove the console, various interior panels and the door sill plates. Pull out the carpet.