Block heaters on S-Series 1.9L engines are an option, not a factory offering. It is an external heater that bolts up to the front of the block next to the exhaust manifold. Earlier blocks (91-98) have a slightly longer heater than later (99-01) blocks because of an additional rib in the block casting.
In the fuel filter.
Remove transmission oil pan
In the stock stereo pushing in the volume knob then pressing up/down on tune changes the hour
This is normal for most cars, as long as it is not overheating and the cooling fan kicks on it should be ok.
The intake heater is the square block between the air horn and the intake manifold.
is it DOHC or SOHC 2 overhead cams or 1 if they are the same DOHC or SOHC then yes most years will fit and 99 and 98 will absolutely fit
On the 98, there is no block heater installed right out of the factory, so therefor, there won't be a plug. If you want a block heater installed, you can get ones that either magnet or glue to the bottome of the oil pan. I believe that this is the only option for the passat.
Its under the intake manifold on the back of the engine. you may want to consider getting a haynes repair manual.
The 1998 Saturn SL1 with a 1.9-liter engine does not come equipped with an oil cooler as a standard feature. This engine design typically relies on the engine's oil circulation system without the need for an external oil cooler. If an oil cooler is desired, it would generally need to be added as an aftermarket modification.
how to change heater core in 98 suburban
A battery is for starting the vehicle. After the vehicle is started, the alternator takes over. Your battery is bad.
How do I replace heater core on 98 Buick lesabre