0
What else can I help you with?
What are the torque specs for the main caps and the rods caps on a 71-73 Pontiac 400?
Torque specs for 71-73 Pontiac 400 main cap bolts 100 ft-lbs, rear mains 120 ft-lbs. Rod bolt specs 43 ft-lbs respectively.
What is the torque for a fly wheel on a 73 Chevy 350?
The torque specification for a flywheel on a Chevy 350 engine is typically around 60-65 ft-lbs. It is important to consult the specific vehicle manual or contact a professional mechanic for accurate torque values and proper installation. Applying the correct torque is crucial to ensure the flywheel functions properly.
Head bolt torque settings for Hyundai Excel 1993?
torque settings are 35-60-73
How many thermostats does 73 turbo diesel engine?
40
What are the torque specs for clynder head 99 Mazda B3000?
Torque specs for B3000 cylinder head is in 4 steps (ft-lbs): Step 1: 59; Step 2: loosen one full turn; Step 3: 34 to 40; Step 4: 63 to 73. - Hayne's Repair Manual # 36071, 1993-2005 Ford Ranger Pick-ups and 1994-2005 Mazda B-Series Pick-ups.
What are the front end alignment specs for a 73 Plymouth duster?
chiltons repair manual from the library will have the answer.
What is the Starter Cranking Amp Draw on a 1989 73 Diesel?
about 600 amps
Will an 89 4 speed work in a 73 ford if you use the 73 bellhousing flywheel clutch pressure plate and throw out?
yep it will all work long as the bell housing bolts to the block
Why causes a 73 dodge van to stall when put into drive?
torque converter lock out engaged.
What is torque specs for 36 mm axle nut on a 73 super beetle?
I believe it's 240 Lbs. You should buy the Bently manual. There is a new tool that's perfect for the axle nut and the Gland nut for the Fly wheel. It mounts to your brake drum and it use's a reduction gear so you can actually use a torque wrench. I belive it reduces it down to about 25 or 30 lbs of torque. It's about $60.00 US. It's awesum. Check the main VW online stores.
Head bolt torque specs ford ranger?
Model Year and engine type may be critical information. From AutoZone.com's Repair Section; here is a typical Ford 3.0L application. You can check there for other engines as well. your 1998 Ford Truck Ranger 2WD (3.0L MFI): Foot pounds (Final torque) Note: Torque sequence ------------ front | 6 4 2 8 | | 5 1 3 7 | ------------ Step 1: torque in sequence to 59 Ft/Lbs Step 2: loosen all bolts in sequence (1) full turn Step 3: torque in sequence to 40 Ft/Lbs Step 4: torque in sequence to 73 Ft/Lbs recheck final torque in sequence
What are the cylinder head bolt torque settings on an Isuzu kb 200?
Torque settings: Phase 1. 29ft/lb or 39 Newton Meter 2. 54 73 3. 72 98
