Take it to a garage for a wheel alignment. They have the spec's.
1999 - 2004 Toe is zero, Camber is zero, Caster is 2.5 deg.
Positive is toe in, the front tires point in at the front.
According to the factory manual for a YJ the toe-in is set at the following: 1/16 in or 1/16 out Cheers
I thought I had read that it was neutral neither in nor out but am trying to confirm this?
The toe
Wear on both edges is a sign of under inflation. Even wear on one edge is a sign of camber out of spec. Uneven wear on one edge is a sign of toe out of spec.
This is the stupidest question ever but i think not
The wheel alignment toe specification for a 1993 Geo Metro typically falls within a range of 0.0 to 0.2 inches for both the front and rear wheels. It's essential to refer to the specific service manual for your vehicle, as slight variations may exist based on the model and trim. Proper toe alignment helps ensure optimal tire wear and handling performance.
On a 1997 Ford Explorer : The toe board is the angled piece between the floor and the firewall in front of the driver and the front passenger
The toe pick.
Camber..............1 degree + or - 45min toe........................ 0.04in +or - 0.04in (1+ or - min)
It is called a "toe grab".