The wheel alignment toe specification for a 1993 Geo Metro typically falls within a range of 0.0 to 0.2 inches for both the front and rear wheels. It's essential to refer to the specific service manual for your vehicle, as slight variations may exist based on the model and trim. Proper toe alignment helps ensure optimal tire wear and handling performance.
Take it to a garage for a wheel alignment. They have the spec's.
wheelalighnment spec 2008 ford terittory ghia
I thought I had read that it was neutral neither in nor out but am trying to confirm this?
1999 - 2004 Toe is zero, Camber is zero, Caster is 2.5 deg.
Camber..............1 degree + or - 45min toe........................ 0.04in +or - 0.04in (1+ or - min)
According to the factory manual for a YJ the toe-in is set at the following: 1/16 in or 1/16 out Cheers
Wheel alignment should be done by a professional shop. Some places (Town Fair) will not align the rear wheels on a Beretta/Corsica due to ridiculous shop policy, but they canbe done. First, ask around to see if a shop near you installs shims for alignment. Shims of proper size/thickness will need to be installed in specific areas behind the wheel bearings in order to properly adjust the rear wheels. If alignment is extremely out-of-spec, you may have a bad wheel hub, or a bent rear beam. The shop will tell you if this is the case, as they should be replaced.
85lbs
76 ft lbs is the spec. 80-90ft lbs won't hurt
127mm = 5.0000000000054in Yes
110 ft lbs
149