O-5----- O-3----- O-2----- O-8
I -------------------------------- I
I -------------------------------- I
I ---------------------------------I
O-7----- O-1----- O-4----- O-6
Above is the bolt sequence O= the bolt location and the number is the bolt pattern you have to follow.
1. Tighten the bolts in the sequence shown to 60 N·m (44 lb ft),
2. Using the J 45059 (torque angle tool), torque the cylinder head bolts in sequence, an additional 95 degrees.
You can buy the torque angle to from Autozone for around 12.99
****Important****
The bolts are torque to yield so it is very important that you buy new bolts the set costs around 33.99
need torque specs for 3.4 pontiac grand am intake and rocker arms
Pontiac Aztek was created in 2001.
The intake manifold torque specs for the 3.1 L on a 2001 Pontiac Grand Prix is 195 ft lb. and 264 Nm at 4,000 rpm. It also has 175 hp at 5,200 rpm.
The 2001 Pontiac Grand Prix 3.8 liter engine intake bolt torque specification is 45 pounds. The intake bolts should be torqued in 15 pound intervals.
There are several companies which produce repair manuals for a 2001 Pontiac Aztek. Haynes, Chilton, and the original manufacturer all have service manuals produced for the vehicle.
MINECRAFT
Try Ebay. I typed in Pontiac Aztek nd all kinds of parts and books for different years come up. Hope this helps
What is the torque spec for a 2001 Saturn head? It has only a single cam
What are the torque specs for a 2001 Honda Passport head gasket
number 36
Bottom of the engine on the oil pan.
Normally it means the alternator is defective.