0
What else can I help you with?
What is the labor charge for installing a radiator in a Honda?
depending on make, model, automatic, or stick, between 1.0 to 2.5 hours labor.labor rates in my shop are $89- hour.
How much for replace a rack and pinion?
The cost to replace a rack and pinion steering system typically ranges from $800 to $1,500, including parts and labor. Prices can vary significantly based on the make and model of the vehicle, as well as the labor rates in your area. It's advisable to get multiple quotes from different mechanics to find the best deal. Additionally, consider whether any other related components may need replacement during the process.
How much would it cost to replace a rack and pinion on a 2007 Nissan Armada?
The cost to replace a rack and pinion on a 2007 Nissan Armada typically ranges from $800 to $1,500, including parts and labor. Parts alone can cost between $300 and $800, while labor costs may add another $400 to $700, depending on the shop's rates and location. It's advisable to get quotes from several mechanics for a more accurate estimate.
Is labor rates and labor cost are the same thing?
Rates is cost-per-hour, labor cost is the total, regardless of time.
How much does it cost mto replace a poweer steering rack and pinion on a 2002 cadillac sedan deville?
The cost to replace the power steering rack and pinion on a 2002 Cadillac Sedan DeVille typically ranges from $800 to $1,500, including parts and labor. Factors such as the shop's labor rates, whether you choose OEM or aftermarket parts, and your location can influence the final price. It's advisable to obtain multiple quotes from local mechanics for a more accurate estimate.
How much dose it cost to replace rear pinion set on a Int 2001 4700?
The cost to replace the rear pinion set on a 2001 International 4700 can vary significantly based on labor rates, parts prices, and whether you choose OEM or aftermarket components. Generally, you can expect the total cost to range from $800 to $2,000, including parts and labor. It’s advisable to get a detailed estimate from a qualified mechanic to get a more accurate figure based on your specific situation.
How much does it cost to reprogram the computer in a 2000 Chrysler Sebring?
That will depend on local labor rates.That will depend on local labor rates.
How muck to fix rack and pinion on a Ford Taurus 1999?
Replacing a rack and pinion unit on this vehicle is very labor intensive. It requires dropping the front subframe to gain access. I would say between $500 and $800 dollars give or take. Alldata calls for 3.3 hours plus about $250 for the part. Average shop rates vary, but in my area run $100 an hour. so $350 in labor, $250 in parts, plus fluid, bleeding the system of air, etc..
How much should it cost to replace the rack and pinion steering on your 2000 Chevrolet Monte Carlo?
Replacing the rack and pinion steering on a 2000 Chevrolet Monte Carlo typically costs between $800 and $1,500, depending on labor rates and whether you use OEM or aftermarket parts. Labor costs generally range from $300 to $600, while the parts themselves can range from $500 to $900. It's advisable to get multiple quotes from mechanics to ensure you're getting a fair price.
How much should it cost to replace rack and pinion steering for 2005 Malibu?
The 2005 Chevrolet Malibu came equipped with the engine options in a 2.2 L4, 3.5 V6 and 3.8 V6. The AC Delco Professional (OEM) complete rack and pinion range in wholesale price from 233-300+ $USD. Labor will approximately be 2-3 hours, and an alignment will be needed after install. Labor rates and shop supplies vary by shop with mechanical averages around 100$/hr as July 2014 in the United States.
What is the cost to replace Subaru legacy rack and pinion?
The cost to replace a Subaru Legacy rack and pinion typically ranges from $800 to $1,500, depending on the model year, labor rates, and whether you choose original equipment or aftermarket parts. Labor costs can vary significantly based on your location and the repair shop. It's advisable to obtain quotes from multiple mechanics to ensure you get a fair price. Additionally, consider any potential extra costs for related components that may need replacement during the repair.
What is the average price for installing a toilet fill valve?
The average cost for installing a toilet fill valve typically ranges from $100 to $200, including parts and labor. The price can vary depending on factors such as the plumber's rates, regional labor costs, and the specific type of fill valve chosen. DIY installation can reduce costs significantly, as the fill valve itself usually costs between $10 to $50.
