To disable the automatic shoulder harness on a 1995 Mercury Villager, you can remove the fuse associated with the seatbelt system. Check the vehicle's owner's manual for the specific fuse number related to the shoulder harness. Alternatively, you may also consider disconnecting the harness motor or wiring under the driver's side dash, but this should be done cautiously to avoid any electrical issues. Always ensure safety measures are followed and consult a professional if you're unsure.
Yes, it is automatic.
The cruise control module of a 1993 Mercury Villager is located under the passenger side of the dashboard.
4F20E four speed automatic.
The 1996 Mercury Villager modulator valve can be found on the firewall in the engine compartment. The modulator valve will be on the passenger side of the firewall.
The cruise control computer module is located on the passenger's side of the engine compartment on a 1993 Mercury Villager.
NO, it is not the same and not interchangeable.
Open the drain plug on the passenger side of the radiator.
In the lower part of the dashboard on the passenger side.
Motorcraft MERCON automatic transmission fluid for the automatic transaxle ( according to the owners manual )
It's on the passenger side, at the very bottom, in back.
The thermostat at the engine in a 2000 Mercury Villager is located Êon the right passenger side near the middle. You should look for the jiggle valve on the thermostat that should be facing up.
According to the 1997 Mercury Villager Owner Guide : The jack is behind a removable plastic panel , in the cargo area , on the passenger side ( there is also the tool kit with the lug wrench )