You need to take the dash apart to get to it. I had the same problem in my 2000 malibu. Are u having a theft system problem? I was. You need to take the ignition apart too. Your going to need to reprogram the new ignition lock cylinder with your computer. To reprogram just turn the key to the on position (dont start it) let it sit for 10 minutes, repeat this 3 times. It should be programmed now. Now start it.
can I switch ignition cylinder with a different ignition cylinder w/key in a 2004 chevy Malibu without having to use a passcode
The ignition is removed by taking down the kick panel below the steering wheel. They are a bear to get out. Make sure you have the whole cylinder assembly because they most often break apart when you remove them.
too much weight from too many keys cause the cylinder to wear out. try attaching key to breakaway keychain to reduce weight.
The cylinder on the very front of the engine is #1.
4 or 6
Remove the retaining ring at the top of your Chevy S 10 ignition lock cylinder. Slide the ignition lock cylinder out. Remove the wiring harness from the back of the ignition lock cylinder. Reverse the process to install the new ignition lock cylinder.
Master cylinder brake lines are the most common brake lines on a the Chevy Malibu.
== ==
The Malibu has been in production on and off for Fifty years, What year are you asking about?
the one closest to the alternator
123456
About 5L