0
What else can I help you with?
How can you read engine malfunction codes on a 2003 silverado without a scanner?
Most vehicles after 1995 incorporate the OBDII system and you have to use a scanner to retreive the codes. However, there are auto parts stores such as Auto Zone that will scan it for you ay no charge.
How do you check engine codes on a 2003 Chevy 2500HD without scanner?
You can't, you must use a scanner.
How do you obtain error codes from the malfunction engine light on your 1986 Mercury Sable when the car is not running?
The engine doesn't need to be running. Just turn on the keyswitch with the code scanner connected.
What does the Check engine light on a 2003 Mazda protege 5 mean?
It means you have a malfunction in the cars engine. If it blinks stop ASAP!.. You need a scanner to pull the codes to get to what exactly is wrong
What is engine malfunction code 165165 on a 2003 Jeep liberty 3.7L engine?
That is not a valid code number, it should be a "P" followed by four numbers. example P0123
How do you get codes from a Jeep liberty?
To retrieve diagnostic trouble codes (DTCs) from a Jeep Liberty, you can use an OBD-II scanner. Simply plug the scanner into the OBD-II port, typically located under the dashboard near the driver's seat. Turn on the ignition without starting the engine, and follow the scanner's prompts to read the codes. Alternatively, you can also use the "key dance" method by turning the ignition on and off several times to display codes on the odometer, but using a scanner is more reliable.
How do you get the check engine code for a 2003 Chevrolet Impala without a scanner?
I am sorry but you do not without the proper equipment.
Where do i get an engine scanner?
What does a engine scanner look like
What is engine code P0340 for a 2003 Jeep Liberty?
Trouble code P0340 means: Camshaft position sensor "A" circuit malfunction (Bank 1)
How do you reset engine malfunction on Renault Clio 1.4 16v?
To reset the engine malfunction light on a Renault Clio 1.4 16v, you can use an OBD-II scanner to clear the fault codes stored in the vehicle's ECU. Simply connect the scanner to the OBD-II port, read the codes, and then select the option to clear or reset them. Alternatively, you can disconnect the car battery for about 15 minutes to reset the ECU, but this may also reset other settings. Always ensure that the underlying issue causing the malfunction light is resolved before resetting.
What could be the problem with OBD code P0320 1999 F-150 5.4 engine?
Trouble code P0320 means:Ignition/distibutor engine speed input circuit malfunction. and you can use the Ford obd scanner to repair, you can DIY, it is easy.
How do you get the check engine code for a 2003 impala without a scanner?
A lot of parts stores will check it for free
