Remove wheels
Re-install 2 lug nuts to hold rotor in place
Remove caliper mounting bolts
Slide caliper off rotor
Uses a "C" clamp to fully retract piston into caliper body
Replace pads inner and outer
Re-Install Caliper
PUMP BRAKE PEDAL TO SET PADS AGAINST ROTOR PRIOR TO MOVING VEHICLE Remove wheels
Re-install 2 lug nuts to hold rotor in place
Remove caliper mounting bolts
Slide caliper off rotor
Uses a "C" clamp to fully retract piston into caliper body
Replace pads inner and outer
Re-Install Caliper
PUMP BRAKE PEDAL TO SET PADS AGAINST ROTOR PRIOR TO MOVING VEHICLE Remove wheels
Re-install 2 lug nuts to hold rotor in place
Remove caliper mounting bolts
Slide caliper off rotor
Uses a "C" clamp to fully retract piston into caliper body
Replace pads inner and outer
Re-Install Caliper
PUMP BRAKE PEDAL TO SET PADS AGAINST ROTOR PRIOR TO MOVING VEHICLE
No
it could be a combination of things like a blown fuse or a bad bulb or your brake switch on the top of your brake pedal could be bad, check and replace if you have to.
Get a new one .
if turn signals are working , and brake lights not working, i would replace the stop light switch on the brake pedal
Take it to a garage and ask them "Can you replace my brake shoes please"
The 1998 Ford Ranger speed sensor ring can be located on the passenger wheel. The speed sensor ring will be on the inside of the brake rotor.
To replace the brake light bulb on a 1996 Ford Ranger is very simple. There are four bolts that hold the housing that will need to be removed. After the bolts are removed, the wires connector needs taken off and then the bulb can be twisted out.
For a 1993 Ford Ranger : ( DOT 3 brake fluid )
What size is the steel brake line tubing on a 1994 Ford Ranger
My Ford Ranger is a 1998 4.0 ltr V6.
What is the timing for a 1998 ford ranger 2.5l
Master cylinder or drum brake (hydraulic slave) wheel cylinder or disc brake caliper cylinder? drum brake shoes rear