0
From the owner's manual
Programming spare keys
You can program your own coded keys to your vehicle. Please read and
understand the entire procedure before you begin.
Tips:
• A maximum of eight keys can be coded to your vehicle.
• Only use Securilock keys.
• You must have two previously programmed coded keys (keys that
already operate your vehicle's engine) and the new unprogrammed
key(s) readily accessible.
• If no previously programmed coded keys are available, you must take
your vehicle to your dealer to have the spare key(s) programmed.
1. Insert a previously programmed
coded key into the ignition.
2. Turn the ignition from the 1 (LOCK) position to the 3 (ON) position.
Keep the ignition in the 3 (ON) position for at least one second, but no
more than 10 seconds.
3. Turn the ignition to the 1 (LOCK) position and remove the coded key
from the ignition.
4. Within ten seconds, insert the second previously coded key into the
ignition.
5. Turn the ignition from the 1 (LOCK) position to the 3 (ON) position.
Keep the ignition in the 3 (ON) position for at least one second, but no
more than 10 seconds.
6. Turn the ignition to the 1 (LOCK) position and remove the second
previously programmed coded key from the ignition.
7. Within twenty seconds of removing the previously programmed coded
key, insert the new unprogrammed key into the ignition.
8. Turn the ignition from the 1 (LOCK) position to the 3 (ON) position.
Keep the ignition in the 3 (ON) position for at least one second but not
more than 10 seconds.
What else can I help you with?
Where is the keyless entry key pad entry code on a 2008 Ford Escape?
How do I recover a lost Keyless Entry Code on a 2008 Ford Escape Limited? Above is NOT an answer ! Hello ?!
What size hex key for caliper bolts on 2008 ford escape?
9 MM
What is the keyless entry key pad entry code on a 2008 Ford Escape?
Each vehicle with a key pad has it's own factory code
How can you get into your locked 2008 Ford Escape?
The unlock button on the key fob usually works. If it doesnt you may have to use the keys.
How do you unlock Ford Escape without key?
One way to unlock a Ford Escape without a key is with the car remote. Another way to unlock a Ford Escape without a key is by using a coat hanger. You may have to call a locksmith to open your car door for you.
What color is the key sense wire in 2004 Ford Escape?
The key sensing wire in a 2004 Ford Escape is black and pink. It is always a good idea to verify the color of the wire before doing any work.
How do you reset anti theft system on 2008 ford escape?
To reset the anti-theft system on a 2008 Ford Escape, first, ensure that the vehicle is unlocked and that you have the key or key fob. Insert the key into the ignition and turn it to the "On" position without starting the engine, then back to the "Off" position. Repeat this process three times, finishing in the "On" position. This should reset the system, allowing you to start the vehicle normally. If the issue persists, consult a professional or refer to the owner's manual for further troubleshooting.
What size tool do you need to change brakes on a ford escape 2008?
you will need an Allen key 9mm to remove the caliper.however very difficult to find one unless by snapon tools
How do turn off the chime on a ford escape 2010?
Do you mean the key in ignition chime?
How do you reset securiLock anti-theft system on 2008 Ford Escape?
To reset the Securilock anti-theft system on a 2008 Ford Escape, insert the key into the ignition and turn it to the "On" position without starting the engine. Leave it in this position for about 10 minutes until the security light on the dashboard stops flashing, then turn the key to the "Off" position. Repeat this process two more times, and on the third cycle, start the engine. This should reset the system and allow normal operation.
Where can you find the key code on a 2007 ford Escape?
On a 2007 Ford Escape, the key code can typically be found on a label attached to the driver's side door frame or on the computer module under the dashboard. Additionally, if you have the original key or the owner's manual, the key code may also be included there. If you're unable to locate it, you may need to contact a Ford dealer for assistance.
How to reset alarm on Ford Escape?
turn it off with the remote or you must use the key in the door.
