0
Recently broke exterior door handle (door froze) on my explorer.
I ordered the handle through dealership ($146) then painted the handle. To remove the door panel there are two snap on caps that must be removed first, one on the handle and one next to the latch. Pull off the cap/panels then remove screws plus one screw at very bottom of panel. To get the panel off you need to pull hard in out and upwards direction to get snaps off. There will be a cable that connects to your latch that can be remove with needle nose pliers. Also there is an electric cable with a snap connector. Push in the tab and pull the connector apart.
Cut off the foam backing to access the inside of the door. Remove both nuts holding on handle. Open yellow tab that is on the threaded rod with a pair of pliers (this piece hinges). Remove handle (you may want to remove rod first) replace with new handle and repeat steps in reverse.
What else can I help you with?
How do you replace the outside door handle on a 2001 Ford Explorer?
replacing door handle on a 2001 ford explorer? what tools are needed?
How Replace exterior door handle 2000 ford explorer?
Its on youtube
Replacing door handle 2001 explorer sports trac?
how do you replace a left door handle 2002 sport trac ford
How do you replace the door handle on a 1998 Explorer?
If it's the outer handle you would need to remove the door panel, then remove the rivits that hold the handle to the outside of the car. Then remove the window track and slide it down inside of the door and unhook the rod on the handle,and now you can slide the door handle out.
How do you replace inside door handle for a 2006 BMW x3?
To replace the inside door handle on a 2006 BMW X3, start by removing the door panel. This typically involves taking out screws and gently prying off the panel to detach it from the door. Once the panel is removed, locate the handle mechanism, disconnect any clips or screws, and replace the old handle with the new one. Finally, reattach the door panel, ensuring all clips and screws are secured properly.
How do you replace the front driver side door handle to a 96 ford explorer?
Should have access after removing inner door panel Should have access after removing inner door panel
How do you replace an interior Ford Fusion door handle?
To replace interior Ford fusion door handle you must remove the door panel, take off the old handle and replace with the new one, and then replace the panel back on the door frame.
Outside Door handle 1999 explorer how do I replace?
I ran into the same problem with my 99. Turns out the handle is riveted on and has to be done by the dealer. There is a certain tool i guess that is needed. Goodluck
How do you replace a 1998 cheyenne inside door handle?
how do I replace the inside door handle on a 1998 chevy cheyenne?
How do you replace the door handle on an 1999 Olds Alero?
youll need to take the door panel off, then unscrew the handle assembly and replace with a new handle ( junkyard?). screw that in then replace door panel.
How do you replace passenger side door handle on 2010 F-150?
Inside door handle or outside door handle?
2006 Buick lucerne door panel removal?
I have to replace the drivers side door handle on a 2006 Buick Lucerne. How do I remove the panel to access the bolts on the handle. (Like most panels there isn't visible screws to remove the panel.
