0
Should be the same as my 2001. Use a small screwdriver (Torx 15 I think) to remove the screw holding the orange unt to the car. Then swing out the entire orange unit starting at the end that moves freely near the screw. Twist out the socket, replace the bulb (mine was a 24 bulb) then reverse everything. One time the bulb was OK but the socket rusted out. I got a replacement socket with wires and heat-shrink cover (no bulb) for about $25 and did it myself in 10 minutes using butt-end connectors. Good luck.
What else can I help you with?
How do you replace marker light for 1993 Chevrolet s10 pickup truck?
Remove the socket containing the bulb from behind the bumper. Twist the socket 1/4 turn counterclockwise and pull the socket out.
How do you replace a turn signal flasher on a 2000 Chevrolet Malibu?
To replace the turn signal flasher on a 2000 Chevrolet Malibu, first, locate the flasher unit, which is typically found under the dashboard near the steering column. Remove the old flasher by pulling it straight out of its socket. Insert the new flasher into the same socket, ensuring it is securely connected. Finally, test the turn signals to verify that the new flasher is functioning properly.
What size socket will BE needED to replace a harmonic balancer on a 1998 Malibu?
15mm
What size socket fits the front hub nut on 2005 Malibu?
how do you replace front passenger window switch on a 2000 chev malibu
How do you replace the front light bulb on a Chevrolet Malibu?
If it is like mine you have to remove the whole fixture to get to the headlight and park light/turn signal, but it not really that hard I think you just need a 10mm socket and wrench but I might be off on the size of the wrench.
How do you replace front right marker light on Mercedes c 300?
To replace the front right marker light on a Mercedes C300, first, open the hood and locate the headlight assembly. Remove the cover or housing protecting the marker light by unscrewing any clips or screws. Gently twist the marker light bulb socket counterclockwise to remove it, then replace the old bulb with a new one, ensuring it is securely in place. Finally, reassemble the housing and test the new marker light.
How do you replace the spark plugs on a 2004 Chevy Malibu Maxx?
Remove the spark plug wires from your 2004 Chevy Malibu spark plugs. Remove the old spark plugs with a 5/8 deep well socket, by turning the socket to the left. Reverse the process to install the new spark plugs.
How do you replace the front side marker bulb Saturn sl2?
Just stick your arm under the bumber. The bolt is in a twist lock socket like the headlights.
How do you change the shift lever console light bulb in a 2003 Chevrolet Malibu?
To change the shift lever console light bulb in a 2003 Chevrolet Malibu, first, disconnect the negative battery terminal for safety. Then, remove the trim panel around the shift lever by gently prying it off with a flat tool. Once the panel is removed, locate the light bulb socket, twist it counterclockwise to remove it, and replace the old bulb with a new one. Reassemble the trim panel and reconnect the battery terminal to complete the process.
How do you change a side marker bulb on a 2004 tl?
To change the side marker bulb on a 2004 Acura TL, first, locate the side marker assembly on the fender. Use a flathead screwdriver to gently pry out the assembly from its housing. Once removed, twist the bulb socket counterclockwise to release it, then pull out the old bulb and replace it with a new one. Finally, reinsert the bulb socket, twist it to secure, and snap the side marker assembly back into place.
How do you replace the side marker lamp bulb in a 2003 c240?
To replace the side marker lamp bulb in a 2003 Mercedes-Benz C240, first, locate the side marker light assembly on the vehicle. Gently pull the assembly out from the body of the car—this may require a flathead screwdriver to pry it out carefully. Once removed, twist the bulb socket counterclockwise to release it, then pull out the old bulb and insert the new one. Finally, reassemble the socket and push the light assembly back into place.
How do you change a front blinker bulb on a 1986 Chevrolet Celebrity?
To change the front blinker bulb on your 1986 Chevy Celebrity simply reach up behind the bumper and unplug the socket from the fixture. Replace the bulb in the socket and plug the socket back into the fixture.
