i have a 2002 Dodge truck and this is how it is done;
1) lower the tailgate
2) There are 2 "torx" screws holding the housing on, remove them
3) The wire that leads to the bulb mount must be removed, there is a red lock on it, slide the lock to the left (from the top) and then remove the taillight assembly.
4) there are 4 Phillips head screws holding the light bulb mount, remove them and pull the mount from the lens assembly
5) replace bulbs
6) installation is the reverse of the dis-assembly.
Have fun !!!
the tail light is screwed in from the inside of the bed of the truck
where can you find a website for free diagram of tail light wiring on a 1994 dodge 1500 truck?
To change a brake light on a 2004 Dodge Ram Hemi truck, first, open the tailgate and locate the access panel on the inside of the tail light assembly. Remove the screws or clips securing the panel, then carefully pull out the tail light assembly. Disconnect the wiring harness, remove the old bulb by twisting it counterclockwise, and replace it with a new bulb. Reassemble the tail light by reconnecting the wiring, securing the assembly, and replacing the access panel.
how do you change the tail lights on a 1996 Nissan pick up?
on the tail light problem - unbolt the tail light from inside th truck -the hold tail light assemble will come out - it is recommended to change all the blubs your all ready there
The tail light bulbs are accessible from underneath the back of the truck, up inside the rear of the pickup box.
under the carpet in the trunk
I need a answer to my question. Thanks
The sport package, for a 1998 Dodge 1500 RAM pickup truck, will come standard with tail light covers. The covers have a chrome finish.
To change your Durango's tail light, first make sure to have a flat head screw driver and a new bulb. You will then open your trunk and remove the screws to the tail light, swap out the bulbs and replace the housing case.
lower the tail gate on the truck. there will be 2 torqx head screws removed the screws it will loosen the inside of the tail light assy... pull on the tail light assy strait back. the light assy should come out turn the bulb casing on the back of the light assy and pull the bulb out.
to change f250 tail lights lower tailgate on side of bed where tail gate sits when closed there are a couple of screws at tail light level remove these screws tail light will then come out of truck body bulbs are at back side of tail light assembly and can now be changed replacement is exact opposite of removal