answersLogoWhite

0

Check the bulbs

Check the turn signal stalk - make sure that it is "cancelling" completely

Check sockets for corrosion, power, and ground i had the same problem on my 63 and what happened was the wires broke away from the solder in the pigtail

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Which of the four lights are your brake lights on 2004 Chevy Impala?

Have someone go in the car and press the pedal and have another look at the side thats working to determine this.


Chevy Tahoe brake lights?

Yes they indeed have brake lights...


05 Chevy Impala brake light come on when vehicle is turn off?

my 05 Chevy impala brake light come on when my vehicle is turned off killing my battery.


Is there a diagram on-line that illustrates the Chevy Impala 2000's Brake System?

Yes, there a diagram that illustrates the brake system in a Chevy Impala. It is found in the maintenance manual for the car.


How do you change rear brake pads on 2003 Chevy Impala?

Remove the tire and wheel from your 2003 Chevy Impala. Remove the brake assembly spring and the break caliper. The brake pads will come off. Reverse the process to install the new brake pads.


How do you disable the automatic headlights on a 2002 Chevy Impala?

Turn the car off. push on the parking brake 1 or 2 clicks turn car on. the lights will not come on


How did fixing bad ground wire on running lights passenger side for 2000 Chevy S-10 affect brake lights. Now the drivers side ONLY brake light goes off when apply brakes.All other lights seem work OK?

Perhaps fixing the ground wire for the passenger side on the 2000 Chevy S-10 will require that the driver's side ground wire also be fixed in order to have the brake lights work properly. There has to be a short somewhere in the wiring for the lights to go off.


Chevy Impala 2001 service traction light on?

Hi i have an 2001 Chevy impala and my service traction Light is on. plus my safety brake is locked


How do I adjust the parking brake on a 2000 Chevy Impala?

The 2000 Chevrolet Impala parking brake will have an adjustment bolt on the parking brake assembly. Turn the adjustment bolt to loosen or tighten the parking brake.


Have no tail lights or brake lights on a 1967 Chevy impala?

Turn Signal Troubleshooting (check in this order): 1. Check Fuse 2. Check Bulbs See sources and related links below for bulb information.


Why my headlight in my Chevy impala don't work properly?

Replace the light sensor, it is under dash, 22$ at auto zone, my head lights quit working at night, but brake ligjts & fog lights still worked


Do you have to remove the hub bearing when changing brake rotors on a 2002 Chevy Impala?

No.