pull out the speaker covers, get a 7mm socket, & remove the 2 screws..
Take it to Best Buy and have them switch out the speakers. That's what I did.
how do ypu change front turn signal bulb on Oldsmobile 1991 cutlass cierra
The firing order for a 1987 Cutlass Cierra with a 2.5L is 1, 8, 4, 3, 6, 5, 7, 2. When you face the car the number one cylinder is on the front left.
in a 93, there is an electronic rocker switch on the front lip of the seats, maybe the same for 95.
To access the front speakers in a 1989 Oldsmobile Cutlass Ciera, first, remove the door panels by unscrewing any visible screws and gently prying off the panel to detach it from the clips. Once the panel is off, you’ll see the speaker mounted in the door. Disconnect the wiring harness from the speaker, and then unscrew it from its bracket to remove it. Reassemble in reverse order after replacing or inspecting the speakers.
You must first remove the instrument panel,then remove all the screws that hold the top of the das on, then you will see you speakers. It is a lot to go threw, but i just did mine and it worked out ok. Cheers
Front = 3 & half, Rear = 4x10
how do i remove the front fender to 1996 Oldsmobile cutlas supreme.
6 cyl. ? at the rear lower section of engine 4 cyl. ? at the lower front end of engine behind the radiator
anything with a 4t60e . its the most common front wheel drive gm tranny
The Chevrolet equinox front speakers are held in place with two retaining screws. Remove the retaining screws and the wiring harness. The speakers will come out.
No