use a 15 mm box end wrench to loosen the bolt which runs through the center of the tensioner pulley - turn it counter-clockwise. next, use a 15 mm socket to loosen the tensioner bolt - again, turn counter clockwise to loosen. remove the belt and replace with new one. turn tenisoner bolt clockwise to tighten belt. tighten bolt through center of pulley. put some belt dressing on and you are good to go!
NOT HERE
You can obtain a serpentine belt diagram have most Chrysler/Jeep dealerships. The serpentine belt diagram can also be found at most auto-parts stores.
The water pump is powered by either a drive belt or serpentine belt. Follow the belt and you will locate the pump.
picturediagram of how to install 89 Cherokee serpentine belt
where can you find a free diagram for putting a air conditioning belt on a 2001 Montero sport Mitsubishi?
3/4' to 1" deflection
If it goes away, then it's probably the air compressor going bad and tying up. check the tension pulley and the serpentine belt.
how do you change the serpentine belt on a 2001 Rodeo
Put the serpentine belt around the pulleys on your 2001 Chrysler LHS. Tighten the serpentine belt by pushing the tensioner pulley to the left. Tighten down the tensioner pulley and the serpentine belt will be tight.
it is the belt by the alternator belt
A/C Condenser is on the serpentine route.
It has a serpentine belt with a built in tensioner. You can't tighten it. If it is loose, it needs replacing or the idler pulley is defective, or both.