flat head screw driver in the hole in the light...... unscrew and turn wire harness 1/4 turn and light will come out of lense. replace bulb. replace and screw back in.
You have a burned out bulb on the right side. Even a the side marker bulb will affect the turn signal
how do you change a rear turn signal bulb on a 2010 buick lucerne
How do you replace the front turn signal bulb located on a 2001 Buick Century?"
I just changed a turn signal bulb in my 2001 330xi. I found the answer on Wiki. Look for the question "How do you replace the front turn signal bulb located on a 2000 BMW 323?" Same design. And, surprisingly, very easy to change. Should be similar to this: http://m3.madrussian.net/diy_front_turnsignal.shtml
To replace the front turn signal bulb on a PT Cruiser, first, open the hood and locate the headlight assembly. Remove the two screws securing the assembly, then gently pull it out to access the bulb socket. Twist the bulb socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble everything by reversing the steps. Make sure to test the turn signal to ensure it’s working properly.
change it from the inside
For illustrated answer go to http://www.focusfanatics.com/howtos/rearlight/
how do ypu change front turn signal bulb on Oldsmobile 1991 cutlass cierra
The 2001 Dodge Intrepid front turn signal lamp bulb number is 3157A. See sources and related links below for pictures and more bulb information.
To change the rear turn signal on a 2001 Pontiac Grand Prix, first, open the trunk and locate the access panel on the side where the bulb is located. Remove the panel by unscrewing or unclipping it, then twist the bulb socket counterclockwise to remove it. Replace the old bulb with a new one, ensuring it is securely in place, and then reassemble the access panel. Finally, test the turn signal to ensure it is working properly.
how do i change driver side turn signal bulb on 1992 dodge caravan?
change the bulb .also check for bad ground on that light