you just pull the three bolts holding the valve cover down. the bolts run right down the middle of the valve covers. pull the valve cover off, replace the old gasket with the new one and tighten the valve covers back on.
You have to remove the diff cover, then replace with new gasket and refill thru plug.
how to change timing cover gasket on a 1996 chevy lumina
With a wrench
How to Remove the Steering wheel From a Chevy Blazer 2001
video to learn how to replace the engine gasket..upper & lower gasket for 1999 Monte Carlo.
To change the valve cover gasket on a 2009 Chevy Aveo, first ensure the engine is cool and disconnect the battery. Remove any components obstructing access to the valve cover, such as the air intake and ignition coils. Unscrew the valve cover bolts, gently lift the cover off, and clean the mating surfaces. Replace the old gasket with a new one, reassemble the cover, and torque the bolts to the specified settings.
how to install time chain cover on a1997 blazer
hoe tdo you change a valve cover gasket on a daewoo nubira
Begin by removing the valve cover retaining bolts. Peel the old gasket off and clean the surface. Put the new valve cover gasket on. Replace the valve covers to their original position.
Remove the valve cover.....scrape off old gasket.....clean gasket surface on valve cover....apply gasket sealent to valve cover gasket surface.....set gasket in sealent.....reinstall valve cover.
The oil cap on a 1998 Chevy Blazer is located on the passenger side of the motor. It is just to the left of the manifold cover.
Under the Dashboard on the Drivers side, has a Plastic Cover.