How to Remove the Steering wheel From a Chevy Blazer 2001
The buzzer that lets you know the key is in the ignition in a 1989 Chevy Blazer is in the steering column. To access it you would need to remove the steering wheel with a special tool, or remove the ignition assembly. The key makes contact with a tab that activates the buzzer.
To remove the steering column in a 1986 Chevy Celebrity: 1. Remove the trim panel under the steering column. 2. Remove the noise panel. 3. If the car has column shift remove the gear indicator from the shift bowl. 4. Unplug electrical connectors. 5. Remove the four bolts that hold the steering column up. 6. At this point the steering column should pull out.
Under The left side of the steering column.
Buy a repair manual, or go to the Library.
Unplug the wiring harness from the steering column. Remove the cover plate under the column. Remove shift linkage. Remove two bolts under the dash that hold the column up. Remove the two nuts that connect the column to the steering knuckle. Slide it out.
It can be either and is located on the left of the steering column sometimes mounted on a bracket.
NO..... It is not in the way, it is just a tight fit.
you dont HAVE to remove it but it does make it easier. removing the column it not very difficult.
Diagram of 1990 chevy truck steering column
how do you remove a steering column from a 1964 Chevy nova II it was originality a automatic car but is a 4 speed manual now
How do change a light on a steering column in a 2006 chevy truck?
it's pretty simple. paste this link to your browser. there are a lot more steering column info & diagrams in the box on the right side of this page. good luck, pappy AutoZone.com | Repair Info | GM Blazer/Jimmy/Typhoon/Bravada 1983-1993 Repair Guide | Suspension & Steering