answersLogoWhite

0

What else can I help you with?

Related Questions

What weight oil goes in a front spindle of a 95 polaris xplorer?

5W20 Synthetic, Type f Synthetic trans fluid, or the recommended Polaris premium demand drive fluid.


What is drive sprocket to driven sprocket ratio?

The drive sprocket to driven sprocket ratio is a measure of the relationship between the number of teeth on the drive sprocket and the number of teeth on the driven sprocket in a chain or gear system. This ratio determines how speed and torque are transferred in the system; a higher ratio means the drive sprocket will rotate more times than the driven sprocket, increasing speed but reducing torque. Conversely, a lower ratio increases torque while reducing speed. This ratio is crucial for optimizing performance in applications like bicycles, motorcycles, and machinery.


How do you calculate sprocket rpm?

calculating sprocket RPM is very easy if you know what the RPM of the drive sprocket is. If you know that then it is a simple fraction problem. If you make the drive gear the numerator or the top part of the fraction and the driven gear the denominator or the bottom part of the fraction (DRIVE/DRIVEN) I.E. if the drive sprocket has 25 teeth and your driven sprocket has 100 teeth (25/100) that will reduce to (1/4) or a 4:1 ratio. So if your drive sprocket is spinning at 1000 RPM then your driven sprocket will be spinning at 250 RPM. You can plug your specific sprocket tooth count into that equation and come up with the right answer.


How do I know if the drive sprocket is worn-out on a still ms290 chain saw?

If the drive sprocket is worn out on your chainsaw, the chain will not turn. This is the biggest indicator that it needs repair.


How do you replace chain drive sprocket on a stihl 08s?

remove bar, chain there should be a small cover over the drive sprocket, held on woth a screw, remove cover, then there should be a screw or bolt holding the sprocket on, remove that, pull old sprocket off, replace it in reverse.


What is the best drive sprocket removal tool to use for removing a stubborn sprocket from a motorcycle chain?

A chain breaker tool is the best tool to use for removing a stubborn drive sprocket from a motorcycle chain. It is specifically designed to break and remove chain links, making it easier to take off the sprocket.


Is it legal to drive a polaris razor1000 in the state of texas?

No, it is not legal to drive a Polaris Razor 1000 anywhere in the state of Texas.


How old do you have to be to drive a polaris?

14 and up


How do you replace drive chain on Bobcat?

How to put chain sprocket on bobcat


What type of transmission fluid do you put into a Polaris ATV?

polaris has its own type of transmission fluid. it is called "polaris demand drive fluid" and is available from any polaris dealer


How many types of drive in two wheeler?

Shaft, belt or chain & sprocket


Can you use a 25 tooth sprocket and a 8 tooth drive?

no you can not 25 with 8