To remove the hub assembly on a 1998 Chevy 3500 truck, first, safely lift and support the vehicle. Remove the wheel and tire, then disconnect the brake caliper and rotor. Next, unfasten the hub assembly by removing the bolts securing it to the steering knuckle and disconnect any electrical connectors if equipped with ABS. Finally, pull the hub assembly off the spindle, ensuring you have removed any retaining clips or components as necessary.
Remove the 4 nuts that are against the pulley behind the fan with the belt still on the truck. Once these nuts are removed, the fan will separate from the pulley. Now you can remove the belt & water pump pulley.
The 2007 Chevy truck dash will bolt into a 1998 Chevy truck if both vehicles are the Silverado version of the truck. The dash is different for the lower versions of the interior options.
YES they are the same.
From truck to truck, yeah, they are the same.
You will need to remove Transmission, And you will see it in the bellhouseing. 4 bolts hold it in place.
how do i remove an antenna to a 1998 chevy express 1500 van
NO.
Disconnect the - battery cable Raise and support vehicle Remove wiring at top of starter Remove starter mounting bolts Remove starter
No.
Open the hood there are to locking pin above each headlight assembly. Turn them you unlock them and pull the up. Once they are removed the headlight assembly can be removed.
Chevy Dealer.
Well if the 1998 truck bed is 8 feet and the 2008 is a 6.5 feet the answer is no.How big is the 1998 trucks bed and how big is the 2008 trucks bed.You need to measure length and width.