The hub caps are held on with the lug nut covers, these are plastic, and screw on the lug bolts if you use the lug wrench you can loosen the plastic hub cap lug bolts and be able to remove the hub cap without loosening the lug bolts. 2001 L200's have lug bolts rather than lug nuts.
Remove hub cap and the snap ring that holds the splinen cap in place.
you don't. you buy a new Saturn
Remove the hub cap if equipped. Remove the snap ring holding the lock out hub (regular pliers will work). Pull old lock out hub off. It is sometimes necessary to carefully tap around the hub while pulling it. Insert replacement hub. Replace snap ring and hub cap.
Remove the tire and wheel. Remove the brake assembly and rotor. Remove the axle end cap. The rear hub assembly will come off.
Try using your lug wrench
To remove the center hub cap on a 1994 Montero, first, ensure the vehicle is parked on a flat surface and the wheel is secure. Use a flathead screwdriver or a similar tool to gently pry around the edges of the hub cap, taking care not to damage the wheel or the cap itself. Once the clips are loosened, you can carefully pull the hub cap off. If necessary, consult the vehicle's manual for specific details related to your model.
remove the wheel,remove the brake caliper assy,remove the dust cap in the center of the axle.remove the cotter pin.remove the nut.then pull the hub off
I own a 2002 kia sportage I installed warn hubs on it . It is very easy on the 2002 you dont even have to remove the wheels . remove the center cap off of the wheel,then remove the bolts on the old hub remove old hub replace with new hub tighten bolts your done but the center cap will not fit.
try a sledgehammer or screwdiver phlab
Audi's don't use hub caps. The wheel is one big piece.
If you are asking about the center "Hub-Cap" on the stock wheels, and of their removal, you have to remove the wheel from the car first. On the inside of the wheel, there are I think three 5/16" head screws that screw through the wheel into the plastic hub cap. Once you remove these screws, the cap is free from securement and will simply fall off.
The rear drums come off with the rear wheel hub. You Jack up the car, remove the wheel.Remove the cap in the center of the hub. Take the cotter pin out, unscrew the wheel bearing retainer nut. Pull drum and hub off as an assembly.The rear drums come off with the rear wheel hub. You Jack up the car, remove the wheel.Remove the cap in the center of the hub. Take the cotter pin out, unscrew the wheel bearing retainer nut. Pull drum and hub off as an assembly.