start by taking the tires off
remove wheel remove brake caliper remove locking hubs special tool required to remove axle nut
to remove brake rotors you need to jack vehicle off ground remove wheels remove brake caliper,these are secured with 2 bolts on back side of calipers next remove axle nut from spindle, and outer bearing slide rotor off axle. dont drop inner bearing instalation is exact opposite
The rotors on a 2003 Ford F350 are replaced by jacking the vehicle up, removing the wheels, taking off the calipers, and removing the bearing caps. The retaining nut can then be removed, the rotor pulled, and a new rotor put in place.
remove rear brake drums
remove tires and place a pry bar between the rotor and the back plate and strike with hammer or mallet
No, the 2003 Ford F350 rims will not fit on a 1999 Ford F350.
Take it to Ford.
use the removal tools in the holes on the sides of faceplate
to remove a 6.8 v10 from a f350 2003 do you have to remove front end
no changed in 2003
The adjustment is on the back of the rear hubs. Below the axle tube is a hole with a black rubber plug in it. Remove the plug and use a brake spoon to adjust the star adjuster.
my 2003 f350 dually avg 13-14 combined