to remove brake rotors you need to jack vehicle off ground remove wheels remove brake caliper,these are secured with 2 bolts on back side of calipers next remove axle nut from spindle, and outer bearing slide rotor off axle. dont drop inner bearing instalation is exact opposite
To remove the front brake rotors from a 2000 Toyota Celica, first, safely lift and secure the vehicle, then remove the front wheels. Next, take off the caliper by unbolting it from the bracket and hang it securely to avoid stress on the brake line. Remove the caliper bracket by unscrewing the bolts, then slide the rotor off the hub. If the rotor is stuck, gently tap it with a rubber mallet to loosen it.
remove wheel. remove brake caliper assembly(not the brake hose) and pull off the rotor.
14mm
Remove the wheel, the calipers and the rotors, reverse procedure with new rotors.
How to Install Front Brake Pads Check Related links below.
how do you remove the rear brake rotor on a 2000 Volvo v70 awd
Front brake rotors are warped
Remove brake caliper and caliper frame. Rotors are now free.
2 wheel or 4 wheel drive, front or rear rotors, it makes a big difference.
The tools required to replace a front brake pad and rotors on a 2000 Jeep Grand are lug wrenches, a jack, jack stands, and a C-clamp. You also will need a wrench and a turkey baster for drawing out old brake fluid.
you have to remove the caliper to access the brake pads
To replace the front rotors on a 2000 Chevy Express, first, safely lift the vehicle and remove the front wheels. Next, remove the brake caliper by unbolting it and hanging it securely to avoid strain on the brake line. Then, take off the old rotor by removing the retaining screws, if present, and sliding it off the hub. Finally, install the new rotor, reattach the caliper, and repeat the process on the other side before lowering the vehicle and testing the brakes.