To acsess the top of rear struts on a 1994 prizm you do something!
Look above the wheel and if it looks like a huge spring that its struts if it looks like a tube then it shock absorbers..If your unsure go to autozone.com and it will tell you
Yes, they will fit. You may have to drill new body mount holes for the rear struts.
A 1994 Honda Civic typically has a MacPherson strut suspension in the front, which means it uses struts instead of separate shocks and springs. In the rear, it generally utilizes a multi-link suspension setup, which includes shocks and springs. Therefore, the vehicle has both struts in the front and shocks in the rear.
It has shocks in the rear I believe. Not struts. Struts are in front.
in the tank. There is an access hole under the rear seat on drivers side
hou to replace rear struts
Struts in the front and rear.
If you're checking the rear struts there's nothing under the seat; there are 3 bolts under the headrests but everything else is under the car. And FYI- it's a nightmare getting the struts off the rear of this car. I had to take mine to a mechanic cause it basically involves unbolting the entire rear end to get the struts off the vehicle.
The Paseo uses struts in the front as well as the rear.
To adjust the rear brakes on a Chevy Prizm, start by ensuring the vehicle is safely lifted and supported. Remove the rear wheel to access the brake drum. If the Prizm has drum brakes, locate the adjustment wheel or star wheel through the access hole on the backing plate and turn it to expand or contract the brake shoes until they lightly contact the drum. After adjustment, reassemble the wheel and lower the vehicle, then test the brakes for proper function.
There are no front shocks on any Beretta. Shocks are in the rear. Struts are in the front.
need to know how to replace rear struts on 2004 kia optma