I have a 2006 Pacifica. If yours is equipped with fog lights, grab the end of the left light control tree, and pull firmly. Then, have the parking lights or headlights turned on. You can't have just the fog lights on.
cheack the wireing
yes there are fog lights installed on the touring model... i think this is a factory option Here are the instructions for installing the fog lights; http://www.handaaccessories.com/odyssey/05odyfoglight.pdf
To add fog lights to a 1999 Miata, you'll need to purchase a fog light kit compatible with the model. Start by mounting the fog lights to the designated brackets or underneath the front bumper. Next, wire the lights to a switch inside the cabin and connect them to the vehicle's electrical system, ensuring to use a relay to prevent overload. Finally, test the lights to ensure proper functionality and alignment.
Infiniti added fog lights to the '05 & '06 model years for cosmetic reasons, and to compliment the styling changes to the front bumper. The fog lights illumination output really doesn't provide any significant lighting performance. Because the Q45's advanced headlamp/HID lighting technology out performs the foglights illumination output. You can add the OEM fog lights from the '05 & '06 Q45 to the '02-'04 model years if you want a similar look.
Fog lights
No, the fog lights have a switch.No, the fog lights have a switch.
To replace the fog lights in a 2006 Mercedes CL500, start by turning off the vehicle and disconnecting the battery for safety. Remove the fog light assembly by accessing it through the wheel well or directly from under the front bumper, depending on your approach. Disconnect the electrical connector, then unscrew or unclip the old fog light and replace it with the new one. Finally, reassemble the fog light assembly, reconnect the battery, and test the new fog lights.
Low beam headlights and fog lights if the vehicle has fog lights.
how do i put fog lights on
To replace a fog light bulb on a 2005 Chrysler Pacifica, start by turning off the vehicle and opening the hood. Locate the fog light assembly behind the front bumper and remove the wiring harness by twisting it counterclockwise. Take out the old bulb by pulling it straight out, then insert the new bulb, ensuring it is securely in place. Reattach the wiring harness and test the fog lights to ensure they are functioning properly.
Fog Lights only, Low Beam only or Fog Lights + Low Beams.