answersLogoWhite

0

Valve timing is not adjustable on a stock engine. The timing chain is either installer correctly or not.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What are the timing degrees on a Dodge 318?

the timing degrees are 13 24 on the dodge 318


What the correct timing mark for a 1990 dodge ram 318?

whats the correct timing mark for a 1990 dodge ram pickup 318


How do you advance a mopar 318 distributor cap?

you do not adjust a distributor cap you adjust the timing.


What causes the timing to jump on a 1978 Dodge 318 motor?

Worn timing chain.


What is the Timing 1968 318 dodge truck motor?

18436572


How do you adjust timing on 1975 Dodge 318?

To adjust the timing on a 1975 Dodge 318, first ensure the engine is at operating temperature and then turn off the engine. Locate the timing pointer and the harmonic balancer, and use a timing light connected to the number one spark plug wire to check the timing marks. If adjustment is needed, loosen the distributor hold-down bolt and rotate the distributor slightly until the timing mark aligns with the specified degrees before top dead center (BTDC), then retighten the bolt. Finally, recheck the timing to ensure it is set correctly.


What is the setting for the timing on a 92 Dodge Dakota with a 318 V8 2wd?

your timing is not adjustable. the pcm controls the timing. your dis. is index.


How do you set the timing on a 2000 full size Dodge van with the 318 in it?

Timing is handled by the computer, there is no adjustment needed.


How do you change an idle control valve in a 1996 dodge ram pickup with 318 motor?

the idle control valve on a 318 is on the back side of the throttle body. Held on by two torqs screws.


How much timing chain slack is to much on a dodge 318 engine?

1/4 MAX


What is the timing degree for 1989 318 Dodge D100?

Its 10 degrees BTDC +/- 2 degrees.


Should I disconnect vacuum when setting timing on 1983 Dodge 318?

yes, unhook the vaccum hose to the distribuetor to set the timing.