0
What else can I help you with?
How do you adjust valves 2000 jeep wangler 4 cylinder?
They are not adjustable, the lifters self adjust to control valve lash.They are not adjustable, the lifters self adjust to control valve lash.
How do you do a Valve adjustment on a 2000 Hyundai Elantra?
You don't. The 2000 Elantra has hydraulic lash adjusters, not fixed-height shims. They adjust the valve lash automatically, constantly.
Does a 2000 lumina have a modulator valve and what does it do?
A 2000 Chevrolet Lumina has a modulator valve located on the side of the transmission. It is designed to control pressure inside the transmission and adjust shifting.
Where is the suction recharge valve 2000 Ford Focus?
where is the suction recharge value on a 200 ford focus
How do you adjustment valve ford focus 2000 SP?
On the ford foucs 2000 need to adjustment yes or no
How do you adjust tappets on tdi 2000 focus?
To adjust the tappets on a 2000 Ford Focus TDI, first ensure the engine is cold and remove the valve cover. Use a feeler gauge to check the gap between the tappet and the camshaft lobe, adjusting it by loosening the lock nut and turning the adjusting screw to achieve the specified clearance. Once adjusted, recheck the gap, tighten the lock nut, and reassemble the valve cover. Always refer to the vehicle's service manual for specific clearance values and procedures.
Where is the pcv valve located on 2000 ford focus 2.0 spi show picture?
IT IS LOCATED ON DRIVERSIDE REAR OF VALVE COVER ON THE CORNER
A 2000 geo metro is making a knocking sound in motor like a rod but it is't?
Valve train
Where is the PCV valve located on a 2000 Ford focus with a 2.0 liter Zetec engine?
http://www.focushacks.com/index.php?modid=70 you have also a picture with the valve. So long!
Where is the valve to add freon on a 2000 Ford Focus?
It is either on or near the recievr dryer in the right rear of the engine compartment. To corrrectly add freon, you need gauges and a refrigerant recovery system
Where is the egr valve on a 2003 Ford Focus?
There are two types of mountings for the 2000-2003 ford focus. See the article at this site: http://autorepair.about.com/library/a/1i/bl718i.htm
Can engine be damaged if timing belt goes on a 2000 toyota sienna.?
If it breaks while the engine is runnIng, yes. It can damage the valve train
