0
There's a simple way to do it...especially if you don't have an assistant. Start at the passenger side rear. Loosen the bleeder screw. It will gravity bleed. Loosen the master cylinder cap while doing this. Keep the fluid level topped off and allow it to bleed until you feel that it has bled enough fluid to fill the line from the master cylinder to the rear. Next the driver side rear. This won't take as much as the passenger side as you are only needing to bleed it from the T intersection. Next passenger side front then driver side. That's it. You should have a good solid pedal now....assuming everything else is in good shape.
What else can I help you with?
Is the 1987 Oldsmobile Cutlass Supreme Rear Wheel Drive?
The Oldsmobile Cutlass Supreme was an intermediate-size car produced by GM for the U.S. market. The Supreme sat atop the Cutlass line, beginning as a trim package and eventually becoming its own model name. The popularity of the Cutlass helped drive Oldsmobile to a million sales for the first time in 1978. More than half were Cutlasses. Production of the rear-wheel drive Cutlass ended in 1987. The last car to wear the Cutlass badge was a smaller, front-wheel drive car that left the line on July 2, 1999. It was replaced, indirectly, by the Intrigue.
Did a 1978 cutlass supreme come with a 350 rocket or a rocket 350?
The 1978 Oldsmobile Cutlass Supreme came with the Rocket 350 engine, which is part of Oldsmobile's Rocket engine family. The term "Rocket 350" refers specifically to the 350 cubic inch V8 engine that was designed for performance. It's important to note that both names refer to the same engine, but "Rocket 350" is the correct nomenclature.
What is the firing order for a 1978 Oldsmobile Cutlass?
1-8-4-3-6-5-7-2 Chevy Dist turns Clockwise Olds Dist turns Counter-Clockwise
How do you remove a 1978 Oldsmobile Cutlass Supreme Steering Wheel?
Just bang your head off the steering wheel and then use a hack saw. If you do not like this method then learn how to do this simple step or pay someone to do it for you.
When was Young Bleed born?
Young Bleed was born on 1978-03-25.
How much does a 1978 cutlass weigh?
Around 40 to 50
Can 22 inch rims fit on a 1978 cutlass supreme?
You can put 22 inch rims on a 1978 Cutlass Supreme as long as the bolt pattern matches. If the bolt pattern matches, you can put any size tire on your vehicle.
Where can I sell your 1978 Oldsmobile toronado?
EBay is the best market for collectors
What other steering columns interchange with 1978 Chevy Nova?
The 1978 Chevy Nova shares steering column compatibility with several GM models from that era, including the 1978-1988 Chevy Malibu, 1978-1987 Pontiac Lemans, and 1978-1986 Oldsmobile Cutlass. Additionally, some columns from other GM A-body vehicles may also fit, but it's essential to verify specific features such as length and mounting points. Always check for compatibility with wiring and ignition systems to ensure proper function.
How do you fix the brakes on your Dodge Colt 1978?
Brakes on a Dodge Colt? It would depend on what is wrong with them, what they are doing or not doing.
What does the speedometer cable need to work properly in a 1978 Oldsmobile cutlass supreme 350 hydramatic transmission Fluid is leaking where the cable goes into the transmission?
For the speedometer cable to work properly in a 1978 Oldsmobile Cutlass Supreme with a 350 Hydramatic transmission, it requires a secure connection to the transmission and must be adequately lubricated. If fluid is leaking where the cable enters the transmission, it may indicate a worn or damaged seal, which could lead to inaccurate speed readings and potential damage to the cable. Addressing the leak by replacing the seal and ensuring the cable is properly installed can restore functionality. Regular maintenance of the cable and surrounding components is also essential to prevent future issues.
What car was made in 1978?
The same cars made today except for the Oldsmobile.
