I HAD THE SAME PROBLEM WITH MY 92 WRANGLER.. GO TO AUTOZONE.COM AND CLICK ON SERVICE MANUALS, THEY WILL EXPLAIN HOW TO BLEED THE SLAVE CYLINDER.. AND IT WORKS.. DON DRC@EPIX.NET
fd
Yes, all miata's have a hydraulic clutch.
how do you bleed a cluch on a 92 Saturn sl
Yes, the 1992 Geo Tracker is equipped with a hydraulic clutch system. This design utilizes hydraulic fluid to engage and disengage the clutch, providing a smoother and more responsive driving experience compared to mechanical clutch systems. The hydraulic setup is common in many vehicles of that era, offering reliable performance.
There is a bleeder on the drivers side. It is on the side of the block. You have to hold the bleed and twist the top part. Its just like bleeding brakes too so you will need another person to help you.
Dot 3 brake fluid
You don't. Hydraulic clutches are by their very nature self adjusting, if the clutch will not work correctly then you are low on fluid or have another problem.
Many GM clutches of the era are not bleed-able. The clutch hydraulics may not be serviceable, replace as set only.
It is by the brake master cylinder
No,It is ahydraulic clutch, try to bleed the unit first and see if that helps.
Just make it snug with an open end wrench and bleed the line to remove air (make sure fluid reserve does not get low while bleeding).
It sure sounds like your clutch is done