To bypass an AC compressor without installing a bypass pulley, you can use a shorter serpentine belt that omits the AC compressor from the belt routing. This requires knowing the correct belt length for your vehicle without the AC. Make sure to check the vehicle's service manual for the appropriate belt routing diagram and specifications. Additionally, ensure that other components driven by the belt are still properly aligned and functioning.
NAPA 25-070825 or Dayco 5070825 These belts will work for installing/bypassing with no A/C
You remove the ac compressor and install a pulley bypass kit from a part store.You remove the ac compressor and install a pulley bypass kit from a part store.
To remove the AC compressor on a 2001 Ford Taurus for installing a bypass pulley, first, disconnect the negative battery terminal. Then, drain the AC system by removing the refrigerant, which should only be done by a certified technician. Next, remove the drive belt and disconnect the electrical connector from the compressor. Finally, unbolt the compressor from its mounting bracket and carefully remove it to install the bypass pulley in its place.
yes you can, just go buy an ac bypass pulley, pull your compressor, and put pulley in its place
remove compressor put a bypass pulley in its place replace belt
hey had this same prob u cant bypass it but you can buy a bypass pulley but gotta remove the compressor i tried to bypass with a belt but its not enough tension so get the pulley and your good to go
Google Pontiac boneville ac compressor bypass pulley. There are a few places that sell a replacement pulley that goes in the spot of the compressor that allows use of the original serpentine belt.
To install an AC compressor bypass pulley on a 1998 Dodge Grand Caravan, first, disconnect the negative battery cable and remove the serpentine belt from the AC compressor. Then, unbolt the AC compressor to access the mounting area for the bypass pulley. Install the bypass pulley in place of the AC compressor, ensuring it is securely fastened. Finally, re-route the serpentine belt around the new pulley and reconnect the battery cable.
if you can reroute the belt to bypass the ac compressor all you need to work out is how much shorter the belt is that you would require
You will need to buy and install an ac bypass pulley from Napa or other parts store to bypass the ac compressor.You will need to buy and install an ac bypass pulley from Napa or other parts store to bypass the ac compressor.
Bypass, in what way? Your pulley is broken, and the belt is off. The A/C will no longer work and the compressor will not turn.
You need a bypass pulley which replaces the a/c compressor. just had it done on my 96 monte. about $40US online.