If it's like my 96 then remove the all-across plastic panel. You might have to remove the headlight piece,(a couple bolts). Then pull out the old bulb. Easy; turn, pull, replace.
Replacing a turn signal bulb on a 2005 Chevy Cavalier can take less than a few minutes requiring no tools and just the bulb itself. First locate the housing the turn signal located in the trunk, then remove the plastic cover. Pull out the old bulb and install the new unit.
Open trunk & pull away carpet from behind the lights.
No
The PCV valve on a 2002 Chevy Cavalier is located on the back of the valve cover. It is a plug in type.
To replace the turn signal assembly on a 2001 Chevy Cavalier, start by disconnecting the negative battery cable to ensure safety. Remove the screws securing the steering column cover and carefully take it off to access the turn signal assembly. Disconnect the wiring harness from the old assembly, then remove the screws holding the assembly in place and replace it with the new one. Reconnect the wiring, reassemble the steering column cover, and reconnect the battery.
how do you take apart the dash cover on my 2003 Chevy cavalier
SPARE TIRE COVER
Remove the cover from your 1986 Chevy Cavalier radio. Remove the radio retaining screws. Slide the radio out and remove the wiring harness and the antenna cable.
4...under the coil cover
In order to replace a timing chain for a 2003 Chevy Cavalier, a person will need remove the oil pan, crankshaft pulley and hub, timing cover bolts, and timing cover. Then the timing cover gasket, timing cover and bolts, crankshaft pulley, and oil pan will need to be installed.
The 1998 Cavalier does have a PCV valve. The valve is in the side of the valve cover, held in by a metal ring.
A diagram should be on the inside cover of the fuse box.