Oil pressure sending unit is located by oil pan in front. Unplug unscrew and install new one
seal. expensive
I changed out the water pump in my 1999 deville. Once you remove the old water pump there is a circle with a hump at the top (forming a saggin water balloon shape) on the casing. It is a just big enough to place the seal in but very hard to get to stay. I out it on then had the water pump and special tool ready to put on so the seal did not fall out. -jt25saint
To replace the rear main seal in a Cadillac SRX, first, you need to disconnect the battery and drain the engine oil. Next, remove the transmission by unbolting it from the engine and lowering it carefully. Once the transmission is out, you can access the rear main seal, which can be pried out with a seal puller. Install the new seal, ensuring it is properly seated, then reassemble the transmission and refill the engine oil before reconnecting the battery.
Numerous places, If your not counting lines then rear seal, front seal, pan gasket and I can go on...!
how do you change a rear main seal in a Chevy 350 motor
how do you change crank seal on a 96 geo prizim
how to change camshaft oil seal 95 pathfinder
Find out where it is getting in. More than likely the seal is bad.
how is the easiest way to change a rear main seal in a 460 ford
Need to know what seal you are talking about. Front crankshaft seal, wheel seal, etc?
To change the shower door seal, first remove the old seal by pulling it off the door. Clean the area where the seal was attached. Measure and cut the new seal to fit the door. Attach the new seal by pressing it onto the door. Make sure it is securely in place.
how to cahange front pinion seal