0
What else can I help you with?
How do you change brake light stop switch in a 1997 Chevrolet 1500?
Looking up underneath the dash at the top of the brake pedal assembly there is a cylindrical (white) switch. Its a pain to get to, but the master cylinder push rod activates it, so this will be loose when you remove the switch. The part is about $15 from your local auto store.
Where is the flasher on a Chevrolet k-1500 pickup turn signal?
The Chevrolet K1500 pickup truck flasher relay switch can be found beneath the drivers side dashboard. The flasher relay switch will be above the brake pedal.
Where is fuel shutoff switch on 2001 Chevrolet 1500?
Chevrolet does not use inertia switches.
Where is the fuel reset button on a 2000 Chevrolet 1500?
There is not a fuel reset or cutoff switch on a Chevrolet.
What Torx size for 2002 Chevrolet 1500 brake caliper?
T-55
How do you replace a brake light switch on 95 GMC Sierra 1500?
To replace the brake light switch on a 1995 GMC Sierra 1500, the steering wheel will have to be dismantled until the brake light switch is reached. The switch is changed by unplugging it and plugging in a new one. There are screws holding the switch in place.
Where is the roll over switch on a 1997 Chevrolet 1500 van?
Chevy did not use a INERTIA switch on there trucks are vans.
1998 gmc 1500 truck will not shift out of park with brake pedal pushed?
bad brake light switch
What makes the brake light stay on a 1990 Chevy 1500?
The brake light switch is either defective or out of adjustment if applicable.
How do you change the front brake pads on a Chevrolet Avalanche 1500 series?
you might just want to get a Haynes or Chiltons from your local auto parts store or amazon.com . it's a great investment
How do you adjust the brake light switch on a 89 Chevy 1500 2wd?
Move the switch until it opens the contact when the brake pedal is pushed down 1/2".
Why do your brake lights stay on all the time and go out when you hit the brakes on your 89 chev 1500 you did replace the brake switch?
If you replaced the brake switch it sounds like you put the new one on backwards.
