From behind the front bumper locate the assembly grasp the plug disconnecting it them twist the bulb socket counter clockwise (when looking at the back of the housing, they are usually pretty snug.
very carfully. jack
howto change 2007 kia spectra parking light
The brake light bulb, on a 2010 Kia forte, can be accessed through the back storage compartment. Take hold of the bulb, push in and turn.
Remove 2 screws under trunk lid, remove panel behind light in trunk, remove 2 nuts from back of light and pull light back to get at bulbs. Kind of ridiculous that you need a screwdriver and a nut driver just to change a bulb.
There is no such thing.
To change the brake light bulb in a 2007 Kia Rio, first, open the trunk and locate the tail light assembly. Remove the plastic cover or fasteners to access the back of the light housing. Twist the bulb socket counterclockwise to remove it, then pull out the old bulb and replace it with a new one. Finally, reinsert the bulb socket, secure the cover, and test the brake light to ensure it’s working.
Read your Kia manual
To change a brake light in a Kia Sorento, first, open the rear hatch and locate the tail light assembly. Remove the screws or clips securing the assembly, then gently pull it out. Disconnect the electrical connector and twist the bulb socket counterclockwise to remove the old bulb. Replace it with a new bulb, reassemble the socket and tail light, and test the brake light to ensure it works.
In the trunk you will find the break lights. Gently turn connecter to expose the bulb simply take out the bulb and replace.
2 STEP PROCESS: 1. TAKE FOG LIGHT BULB OUT. 2. REPEAT STEP ONE(1) IN REVERSE
how do you change the cooling sensor on a kia rio 2003
take out the old bulb and put the new one in :)