Remove 2 screws under trunk lid, remove panel behind light in trunk, remove 2 nuts from back of light and pull light back to get at bulbs. Kind of ridiculous that you need a screwdriver and a nut driver just to change a bulb.
howto change 2007 kia spectra parking light
how do i change a parking light bulb on a 2003 hyunadi accent
very carfully. jack
2 STEP PROCESS: 1. TAKE FOG LIGHT BULB OUT. 2. REPEAT STEP ONE(1) IN REVERSE
To change the left blinker bulb on a 2003 KIA Spectra, first, open the hood and locate the headlight assembly. Remove the screws or clips securing the assembly, then carefully pull it out. Locate the bulb socket for the left blinker, twist it counterclockwise to remove, and then replace the old bulb with a new one. Reinstall the socket, reattach the headlight assembly, and test the blinker to ensure it works.
With your hands.
how do you change a front turnsignal lightbulb on a 2003 monti Carlo
My o/s parking lamp will not light, but, the indicator light is on instead, where do i change the bulb and how do i do this? BMW x5 2003
Not to be unkind - but READ THE MANUAL.
To change the top light bulb on a GE Spectra XL44 oven, first ensure the oven is turned off and unplugged for safety. Remove the glass cover by gently twisting it counterclockwise or pulling it down, depending on the model. Replace the old bulb with a new one, making sure it's securely in place, then reattach the glass cover. Finally, plug the oven back in and turn it on to test the new bulb.
To change the brake light bulb in a 2003 Alero, first, open the trunk and locate the tail light assembly. Remove the screws or clips securing the tail light, then gently pull the assembly out. Twist the bulb socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble by reversing the steps. Ensure the new bulb is securely in place before closing the tail light assembly.
To change the fog light bulb on a 2003 Pontiac Vibe, first, locate the fog light assembly beneath the front bumper. Remove the screws or clips securing the assembly, then carefully pull it out. Disconnect the wiring harness from the bulb socket, twist the old bulb counterclockwise to remove it, and replace it with a new bulb. Reassemble the fog light assembly by reconnecting the wiring and securing it back in place.