The sensor is in the fuel tank with the fuel pump. If you change the fuel sensor you should go ahead and change the fuel pump. Depending on the labor charge of the shop you use parts and labor should be 400/600 dollars.
we have a 1998 rodeo and i could not find the dip stick for tranny then i went on-line and found out that these models have a sealed transmission therefore you can not check them for fluid level.
The fuel level sensor can only be replaced by first removing the fuel tank. it then can be easily removed from the top.
fuel level sensor
Trouble code P0463 means:Fuel level sensor circuit high input
Trouble code P0461 means:Fuel level sensor circuit range/performance
Sure you could get one of these*P0460 Fuel Level Sensor Circuit Malfunction*P0461 Fuel Level Sensor Circuit Range/Performance*P0462 Fuel Level Sensor Circuit Low Input*P0463 Fuel Level Sensor Circuit High Input*P0464 Fuel Level Sensor Circuit Intermittent
Transmission fluid level: As you don
To change the fuel level sensor in a 2000 Chevy Impala, first close the gas and power lines. Remove the wiring and then drop the car tank. Remove the old fuel level sensor and replace it with the new one.
need to drop the tank and pull the fuel pump out and change the sensor
in the coolant bottle is a level sensor. (just as in the fuel tank) if this level sensor is bad, you have to change the sensor. In most cases, the unit is installed in the bottle before it is sealed at the factory. So you must change the whole bottle to fix the problem!
There are many types of level sensors you can use to measure the water level in a tank such as submersible level sensor, ultrasonic level sensor, float level sensor. If you are searching for a level sensor you visit our website iconprocon[dot]com
There are many types of level sensors you can use to measure the water level in a tank such as submersible level sensor, ultrasonic level sensor, float level sensor. If you are searching for a level sensor you visit our website iconprocon[dot]com