There is no engine from 1998 without fuel injection. If You have an older engine, the pump is boltet at the lower engine side. it is just two bolts and easy to install. It is wise to change the seal, because it often break when you unbolt the pump.
yes it can
how to fine timing marks on a 1998 hiace disel van 2l
next to the clutch pedal, there is a smaller fuse box for the normal fuses
You can't find it because it does not have a carburetor. All 1998 Toyota's are Fuel Injected. All Corollas sold in the U.S. since 1993 have been Fuel Injected.
To remove the corner light on a 1998 Toyota Hiace, first, ensure the vehicle is turned off and the keys are removed. Gently pry off the plastic cover or trim surrounding the corner light, if applicable. Then, unscrew or unclip the corner light assembly from its mounting. Finally, disconnect the electrical connector and carefully pull the light out to complete the removal.
How do you change a timing belt on a 1998 Toyota Tacoma? And what part do I need to buy?
how to removed charcoal canister for toyota camry 1998 6cyc
To access the wiper motor on a 1998 Toyota Hiace, first, remove the plastic cover at the base of the windshield by unscrewing any screws or clips holding it in place. Next, disconnect the wiper arms by loosening the nuts and lifting them off the splines. Once the arms are removed, you can access the wiper motor, which is typically mounted under the cover. Unplug the electrical connector and unscrew the motor from its mounting to replace or service it.
a 1998 Tracker would be fuel injected and not have a carb.a 1998 Tracker would be fuel injected and not have a carb.
toyota starlet gearbox oil change
How do you change the light bulbs in the instrument panel in 1998 Toyota corolla
The radiator cap for a 1998 Toyota Hiace typically has a pressure rating of 0.9 bar (13 psi) or 1.1 bar (16 psi), depending on the specific model and engine type. It's important to check your owner's manual or consult with a parts specialist to confirm the exact specifications for your vehicle. Always use a cap that matches the required pressure to ensure proper cooling system function.