answersLogoWhite

0

You must remove the headlight assembly to get working access to the bulb.

Remove the long top outside Torx screw (T30), and the short one.

Slide assembly forward. Use a very small screwdriver to bend back the 2 locking tabs to release the plug. Slide plug straight out.

Then rotate black plastic collar ccw to release the bulb. Bulb pulls straight out.

When installing the new bulb (9007 series), align bulb notches with housing, push it in, then lock in the collar clockwise. Replace that plug, and turn signal plug.

Avoid touching the new bulb with your bare hands. Also wise to replace the amber turn signal bulb at the same time, while you have access to it.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

Change headlight in 2003 Chrysler sebring convertible?

Get the headlight, and see if its just a bulb(from the rear installs) or it's the entire light(installs from the front) ..a library will most likely have a shop manual for free


How do you change expansion plugs on 1997 Chrysler Sebring Convertible?

engine needs to be removed


What mileage to change the timing belt on a 1999 Chrysler Sebring Convertible 2.5L V6 Engine?

100,000 miles.


How much oil does a 1998 2.5 Chrysler Sebring convertible take?

Just under 5 qts with filter change. (approx 4.8 qts)


Can you change timing chain in car 2002 2.7 chrysler sebring convertible?

Yes it can be done in vehicle.Yes it can be done in vehicle.


Does a 2007 Chrysler Sebring have an oil change light?

No the Chrysler Sebring did not have that feature until 2008.


What gets removed to change the battery on a 1998 Chrysler Sebring convertible jx?

The driver side front tire, and inner fender liner need removed.


How do you change the top on a 1998 Chrysler Sebring Convertible?

i have a 96 was alsolooking into changing top look on ebay there is a guywho sells tops with an instructual dvd for installation


How do you change a cabin air filter for a 2000 Chrysler Sebring?

A 2000 Chrysler Sebring was not built with a cabin filter.


How do you change the battery on a 1999 Chrysler Sebring?

where do I find the battery on a 1999 Chrysler sebring, can't find it in the engine compartment?


How do you change the mass air flow sensor on a 1999 Chrysler Sebring?

A 1999 Chrysler Sebring does not have a mass airflow sensor.


How do you get your horn and lighter to work on your 98 sebring convertible?

Change the fuse dummy

Trending Questions
What causes hesitation - misfire during acceleration on a corolla -4E -engine? Why does my 6 cylinder misfire on Dodge 2.7l 2002 Intrepid? Where is the starter located on a 1996 Cadillac Eldorado Northstar engine? Why does my tire make a droning noise? How many quarts of oil in a 2005 dodge ram 1500 5.7 liter 4x4? How do you turn off the change oil light on a Ford Freestar 2004? What is the Difference between a turbo hydra-matic 350 and 375? What is the gear ratio for a Ford f250? Strange problem with your 2004 trailblazer For some reason when i get to cruise control speed and i press the set button it doesn't work The next time i take it out it does then next time it doesnt? Why would a Car hesitate and then stopped running? What would cause a metal-to-metal grinding sound near the front end of a Ford Ranger not heard while idling? What type of oil do you use for a high mileage Ford expedition 1997 8 cylinder? Where is the evap canister located on a 2004 Chrysler pacifica? What would cause a 228 Mercruiser 305 GM V8 engine to lock up 3 hours after running fine? What if the fan switch on your 99' Villager only works on the High position How do you fix it? Where is the ECM located on a 1996 oldsmoble cutlass 3.1? Where is the map sensor located in a 2005 gmc envoy? What are some common problems with coolant temperature sensors on a 2001 Saturn SL 1.9 sohc engine with automatic transmission? How do you check for a bad timing belt on a 5.7 Chevy motor? Why No heat in a 1989 Ford Mustang?