Two screws hold the lamp assembly to the rear bumper cover. Remove the screws. Once the assembly is off the bumper cover, all you need to do is twist the lamp holder a quarter of a turn to remove it from assembly. The bulb itself just pulls out. Read more: How_do_you_change_the_license_plate_light_on_a_2002_Chevy_Cavalier
To change the license plate wiring on a 2009 Chevy Cobalt, first, ensure the vehicle is turned off and disconnect the battery to prevent any electrical issues. Remove the screws holding the license plate light assembly in place, then carefully pull the assembly out to access the wiring. Disconnect the old wiring harness from the assembly and replace it with the new one, ensuring proper connections. Finally, reassemble the light assembly, secure it with screws, and reconnect the battery.
how to change 2005 equinox license plate light i removed the screws but it didn't release
Look above the license plate and find the bulb assembly, grasp the flat part turn it clockwise and pull it out, the bulb just pulls straight out.
unscrew the light from the car, it should pop out. Twist the light bulb out and then pop the light off from the base. Reverse to reassemble.
Change brake light bulbs Just remove the rear license plate. You can change the backup lights and brake light easily.
To change the license plate light on a 1998 Chevy Cavalier, reach up under the bumper and remove the bulb over the license plate. Then put a new bulb in the socket. The bulb can also be accessed by removing the lens on the outside, but there are screws to remove first.
undo the plugs on the plastic grill (the ones ontop) then its a matter of wedging the light back and pulling it up
need more information to answer your question.
press the lens on the light.
Light with a lock on the car
Scan tool
Sylvania 3357 or 3157