Open trunk... access from behind panels. Wes
how to change rear hub on 2006 chevy cobalt 2.2l
To change the rear turn signal on a 2007 Chevy Cobalt, first, open the trunk and locate the tail light assembly. Remove the screws or plastic clips holding the assembly in place, then carefully pull it out. Twist the bulb socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble the tail light by reversing the steps. Ensure everything is securely fastened and test the signal to confirm it works.
how to remove rear struts on 2005 chevy cobalt
Start with checking the left rear brake light bulb.
Answer : unscrew the signal lens and remove the signal bulb and replace with 1157 bulb reverse process
Sylvania 3357 or 3157
Two screws hold the lamp assembly to the rear bumper cover. Remove the screws. Once the assembly is off the bumper cover, all you need to do is twist the lamp holder a quarter of a turn to remove it from assembly. The bulb itself just pulls out. Read more: How_do_you_change_the_license_plate_light_on_a_2002_Chevy_Cavalier
Inside car
remove all the screws from the tail light asembly turn bulb to remove put electrical contact greas on new bulb install new bulb replace screws
In the back seat behind the rear headrest under the platform between the 2 rear winshield speakers.
How do you change the rear brake pads on a 2010 Chevy Malibu
i have a 1990 Chevy van cargo left hand turn blinker not working (rear) all other lights work change out bulb still not working