Dodge Spirit tail light bulb lamp replacement: Purchase the correct replacement tail light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the tail light bulb lamp replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
under the carpet in the trunk
I need a answer to my question. Thanks
Two black thumb screws in the trunk behind the carpet on the back side of the lenses. Gently pull back the carpet behind the lights to access.
To change your Durango's tail light, first make sure to have a flat head screw driver and a new bulb. You will then open your trunk and remove the screws to the tail light, swap out the bulbs and replace the housing case.
check the tail light bulbs
remove tail light, remove burnt bulb, replace burnt bulb, test if it works, then put tail light back on....
Have a look at this link: http://www.wikihow.com/Replace-a-Tail-Light-on-a-Dodge-Grand-Caravan
the tail light is screwed in from the inside of the bed of the truck
# Remove the screws and detach the tail light housing # Rotate the bulb holder counterclockwise and remove it from the back of the housing.Press the tabs and pull the bulb from the holder
To change the tail lights on a 2007 Dodge Caliber, first, open the trunk and remove the access panel on the side where the tail light is located. Unscrew the tail light assembly using a socket or wrench, then gently pull it out. Disconnect the old bulb by twisting it counterclockwise and replace it with a new one. Finally, reassemble the tail light, secure it with screws, and replace the access panel.
How do you change the tail light on a 2001 toyota sequoia
how to change tail light bulb on Toyota sequoia