https://autozone.ro/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/1d/55/f3/0900823d801d55f3.jsp
i have an excel 1994 and originally it was automatic, but it has a Mitsubishi mirage transmission.
change the valve stem seals
You don't
A fuse box diagram for a 1994 Hyundai Excel is found on the fuse box itself. Underneath the cover of the fuse box will be a sticker labeling all the fuses.
i have a 1994 excel and i use 4 quarters of synthetic oil
it is 1 3 4 2
The starter is located near the centerline of the engine, on top just under the intake. The two long bolts that hold it in place are on the left side top of the transmission.
underneath the engine to the right when looking at it with fan belt facing you.
Honestly? At the junkyard, or on eBay.
You must separate transmission from engine. Then the throw out bearing is located on a fork by where tranny attaches to engine. Remove bearing, pack grease into new one, install in reverse order of removing old bearing. You might as well change clutch and pressure plate. Install tranny to engine.
For a 1994 Hyundai Excel, it's recommended to use power steering fluid that meets the specifications of either Dexron III or a similar automatic transmission fluid (ATF). Always consult your owner's manual for the most accurate recommendations. Make sure to avoid using any fluids that contain additives not specified for your vehicle, as they can cause damage to the power steering system.
To change the fuse at the battery of a 1994 Hyundai Excel, first ensure the vehicle is off and the keys are removed from the ignition. Locate the fuse box near the battery, then identify the blown fuse that needs replacement. Carefully pull out the old fuse using fuse pullers or pliers, and insert a new fuse of the same amperage in its place. Finally, double-check the connections before starting the vehicle to ensure everything is secure.